Buy/Sell/Trade Thread

Contribute here, your experiences, tips, advice, requests for help on any subject relating to Ball Stretching.
NB attachments are limited to 60Kb / image size max. 500px x 500px and resolution no more than 72dpi please

Moderators: bobbyballsack, DaveSmith, tundraman

User avatar
tchmango
Posts: 47
Joined: May 17th, 2012, 1:36 am

Re: Buy/Sell/Trade Thread

Postby tchmango » July 23rd, 2012, 11:27 pm

Bought two WMC weights that are to small. 30mm X 15 and a 32mm x15. Will sell for $55 U.S. Paypal and ship anywhere in U.S. for $5 priority mail. Overseas $10 shipping. Box plastic sleeve and key included.

User avatar
HackySackATLANTA
Posts: 94
Joined: June 5th, 2012, 11:09 am
Sexuality: Bisexual
Location: Atlanta GA USA
Contact:

Re: Buy/Sell/Trade Thread

Postby HackySackATLANTA » September 23rd, 2012, 3:49 am

Interested in purchasing any used 40mm x15mm stretcher. Just let me know
SHWING
16oz Split Collar // 00 gauge P.A.

Jymmie63
Posts: 2
Joined: January 26th, 2012, 3:00 pm

Re: Buy/Sell/Trade Thread

Postby Jymmie63 » November 10th, 2012, 7:43 pm

Hey all, I enjoy all your posts and pics, I am looking to try a 32mm ring, I have a 34mm but when its warm out or my balls get truely relaxed it slids off, I think a 32mm will help as I have an 1 1/4 " ring and its too tight. Anyone got a used 32mm to sell let me know. Thanks, Jymmie63

User avatar
tundraman
Posts: 1441
Joined: April 25th, 2012, 11:11 am
Sexuality: Bisexual
Time stretching?: 3 + years
Stretching usage: WMCs
Your hang: free 6.5 inch
Stretching intensity: 24/7/365 until I reached my goal.
Now I only stretch when I feel like it.
Height and weight: 70 inch, 155 pounds
Location: Albuquerque, New Mexico, USA

Re: Buy/Sell/Trade Thread

Postby tundraman » November 11th, 2012, 1:21 am

1 1/4 " = 31.75mm - makes me wonder if it's size is true. Most rings listed in inches are mass produced shaft collars with rounded edges are are actually smaller than the "nominal size". They designed to clamp onto a 1 1/4 shaft with a gap. If designed for a 1/8 inch gap on the shaft then the effective ID would be 1.6mm less with the gap closed or 31.75 - 1.6 = 30.15mm. The next shaft size up is 1 3/8 = 34.925mm.
If your ring isnt absolutely round it is a re-purposed shaft collar and the ID is wider at the gaps than perpendicular to the gaps.
Here 1 mm makes a large difference I can easily feel but I can only tell one size from the other with my vernier calipers when I get them mixed up - too fine for my eyes and a ruler - especially with the rounded edges or full round WMCs. By eyeball I can barely tell the difference between rings 2mm different and then only when they are side by side.
Index of info posts - viewtopic.php?f=4&t=931
Jarod's guide (New link): https://www.secretleather.com/jarod-joh ... hing-guide
Secretleather site for real WMC's: https://www.secretleather.com

User avatar
HackySackATLANTA
Posts: 94
Joined: June 5th, 2012, 11:09 am
Sexuality: Bisexual
Location: Atlanta GA USA
Contact:

Re: Buy/Sell/Trade Thread

Postby HackySackATLANTA » November 30th, 2012, 12:03 pm

Still looking for 40mm stretchers if anyone has any available, LMK
SHWING
16oz Split Collar // 00 gauge P.A.

bobbyballsack
Posts: 185
Joined: January 9th, 2012, 7:10 pm
Time stretching?: 7 Years
Your hang: right at 4 inches
Stretching intensity: From time to time. Wear weights during sex always.
Your relationship status: Married (officially or otherwise)
Are you pierced?: Yes
Height and weight: 6 foot 1 270 lbs
age: 46
Other sexual practices: Ass play, ureathra play
Location: Ponchatoula, Louisiana USA
Contact:

Re: Buy/Sell/Trade Thread

Postby bobbyballsack » December 1st, 2012, 2:40 am

I would think since the health department is ok with piercers autoclaving their stainless tool, then it should be good enough to first clean then boil the weight while fully disassembled. This would allow the screw to be boiled plus the internal threads. I would have no problem using a second hand weight but I would also do a boiling when I recieved it.
--> 1mm seems insignificant until you try to stretch a piercing or your urethra <--

http://www.pornhub.com/users/bobby_ballsack

Started stretching 12/14/2009

User avatar
HackySackATLANTA
Posts: 94
Joined: June 5th, 2012, 11:09 am
Sexuality: Bisexual
Location: Atlanta GA USA
Contact:

Re: Buy/Sell/Trade Thread

Postby HackySackATLANTA » December 1st, 2012, 3:24 am

Really, a quick rinse, the run it through the dishwasher should be sufficent..... heck, soap and water is probably fine.
SHWING
16oz Split Collar // 00 gauge P.A.

User avatar
weightonpa1
Posts: 395
Joined: December 28th, 2012, 1:21 am
Sexuality: Bisexual
Time stretching?: 5yrs
Stretching usage: WMC
Stretching intensity: 24/7/365. other than when i see GP or Hospital visit.
Your relationship status: Married (officially or otherwise)
Are you pierced?: Yes
Height and weight: 5'10"
age: 41
Location: East Yorkshire

Re: Buy/Sell/Trade Thread

Postby weightonpa1 » December 30th, 2012, 2:25 pm

tchmango wrote:Bought two WMC weights that are to small. 30mm X 15 and a 32mm x15. Will sell for $55 U.S. Paypal and ship anywhere in U.S. for $5 priority mail. Overseas $10 shipping. Box plastic sleeve and key included.
I know its an old post but was wondering if you have sold the 32mmx 15.

coolboy81
Posts: 1
Joined: January 12th, 2013, 3:36 pm
Sexuality: Gay

Re: Buy/Sell/Trade Thread

Postby coolboy81 » January 12th, 2013, 4:17 pm

Hi I have a 15mm x 30mm (1.1") ID WMC ® Ball Weight to sell (complete package). It's the wrong size for me.
If you are interested drop me a message.

Garyev
Posts: 3
Joined: July 10th, 2018, 8:56 pm
Sexuality: Gay
Time stretching?: 1 month
Your relationship status: Married (officially or otherwise)
Are you pierced?: No

Re: Buy/Sell/Trade Thread

Postby Garyev » July 14th, 2018, 3:33 pm

Any one in the UK have any weights they like to sell?


Return to “Shared experience for Ball Stretchers”

Who is online

Users browsing this forum: Curious71 and 2 guests