The finger trick for sizing from current ring

Post here for issues to do with sizing and finding the right size weight

Moderators: bobbyballsack, DaveSmith, tundraman

User avatar
tundraman
Posts: 1384
Joined: April 25th, 2012, 11:11 am
Sexuality: Bisexual
Time stretching?: 3 + years
Stretching usage: WMCs
Your hang: free 6.5 inch
Stretching intensity: 24/7/365 until I reached my goal.
Now I only stretch when I feel like it.
Height and weight: 70 inch, 155 pounds
Location: Albuquerque, New Mexico, USA

The finger trick for sizing from current ring

Postby tundraman » July 29th, 2013, 10:48 pm

This finger trick seems to work. Assuming you have normal sized fingers in width: Slide your little finger up to the first knuckle into the ring and let it stay there for ten minutes watching for any signs of constriction - fatigue, color change, skin veins standing etc. If OK, drop 2mm in ID. If things feel quite loose still, you can try this again either inserting to the second joint or using your ring or index finger. If this poses no issues you should be able to drop 4 mm.
If you can't insert even the little finger tip without signs of constriction you are probably at your ideal size.
If you have a teste slipping through at times you are very likely too large.


It is normal for ID to drop some (2-4 mm) as the creamasters and dartos skin muscles get stretched out.
One note: If you have recently been pumping your IDs go way up as everything gets "inflated" - the cell walls get stretched and it takes a while for cells to shed the extra fluid. When I was doing it ( in a sun tea jar ), my ID would not be back to normal for about a week and a half. I finally quit so I wouldn't have to play the ring shuffle game. I never pump with the rings on, it slows the pump, could break my glass jar and risks turning into a tourniquet, cutting off blood flow.
Gett'er Down, Chuck
Index of info posts - viewtopic.php?f=4&t=931
Jarod's guide: http://www.secretleather.com/jarod.johansen
Dave's Secretleather site for real WMC's: http://www.secretleather.com/

User avatar
LoadedBalls
Posts: 218
Joined: November 29th, 2015, 9:22 am
Time stretching?: Steel Weights Since Dec 2015
Stretching usage: 30mm ID x 15mm WMC (190g)
30mm ID x 30mm WMC (450g)
2 x 30mm ID x 45mm WMC (690g)
4 x 32mm ID x 15mm USSR's
Custom 30/32mm ID Ball Forcer with 90 to 150mm Rods for a 100 to 160mm Stretch
Custom 4 1/2” Leather Stretcher with 30-32mm ID
Your hang: 175mm (7")
Stretching intensity: Most Evenings: 2 hours with 2 x 45mm 690g WMC's and 2 x USSR's (120mm 1400g Stack)
Some Work Days: 10 hours with 1 x 45mm 690g WMC and 4 x USSR's (105mm 730g Stack)
Your relationship status: Married (officially or otherwise)
Are you pierced?: No
Height and weight: 186cm 77kg (6'1" 170lbs)
age: 37
Other sexual practices: Using my balls as a butt plug
Lifting Heavy Weights with my balls
Location: UK

Re: The finger trick for sizing from current ring

Postby LoadedBalls » December 6th, 2015, 9:00 pm

-
Last edited by LoadedBalls on December 14th, 2016, 12:35 pm, edited 1 time in total.
Casually Stretching my balls until I can wear a 150mm stack with ease

User avatar
Moonfish
Posts: 302
Joined: May 21st, 2016, 7:49 am
Sexuality: Gay
Time stretching?: 18 months
Stretching usage: Donut 30 36
Bullet 50 34
Your hang: 10 cm
Stretching intensity: 24/7
Are you pierced?: No
Height and weight: 188 82

Re: The finger trick for sizing from current ring

Postby Moonfish » November 23rd, 2016, 3:00 pm

So now you are not able to put in your small finger ? I can easily so also probably to loose

TrumpJunior
Posts: 409
Joined: July 23rd, 2016, 7:13 pm
Time stretching?: started August 4,2016...6:17 a.m.!
Stretching usage: 30mmID x 15mm WMC,ordering more weight currently,Added a 2nd 32mmID x15mm on top on September 16,Added a 3rd 15mm x 34mmID on November 13 (should be 24/7 very soon with the 3rd ring)...Also discontinued the 30mm ID ring,replaced it with 32mmID,much more comfortable!As of Jan 2017,my ID size is 34mm,I can't even imagine getting a 30mm ID ring on.In June 2017 started using 45mm x 34mmID weight every other day,alternating with 30mm.July 2017,moved to a 34ID x 45mm as my 24/7."The screwball",about 50% of evenings starting July 2017.
Your hang: Your going down Hillary!
Stretching intensity: Been 24/7 since August 4,did not think work would allow 24/7 but it works :)
Are you pierced?: No
Height and weight: 6'2" 200lbs
age: 48
Other sexual practices: Looking at Large Breasted Women in Sears Christmas Catalog
Location: NY

Re: The finger trick for sizing from current ring

Postby TrumpJunior » November 23rd, 2016, 3:48 pm

Moonfish,I have found that sizing of the rings is very challenging.My first ring was 30mm ID,I could get it on and wear it,with no numbness,and good coloration of my balls,but it was just too tight for my daily activity and not comfortable.My next weight was 32mm and is SO much better!It also has no chance of falling off or pulling through.Getting the proper size may be a bit of an experiment.The ring against your balls needs to be the proper size.The rings on top of it can be larger without problem.Shea butter is also very,very important for lubrication and tissue growth.

User avatar
Moonfish
Posts: 302
Joined: May 21st, 2016, 7:49 am
Sexuality: Gay
Time stretching?: 18 months
Stretching usage: Donut 30 36
Bullet 50 34
Your hang: 10 cm
Stretching intensity: 24/7
Are you pierced?: No
Height and weight: 188 82

Re: The finger trick for sizing from current ring

Postby Moonfish » November 27th, 2016, 10:25 am

Yes it is challenging, both my rings are 36 inside diameter!? Large i think !? I see a lot of People here with 30/32!?? The 36 id donut of 20mm High slips of ! While the bullet shape 36 id 30mm High stays firmly in place ? I can add a finger ,should i go smaller???

User avatar
Moonfish
Posts: 302
Joined: May 21st, 2016, 7:49 am
Sexuality: Gay
Time stretching?: 18 months
Stretching usage: Donut 30 36
Bullet 50 34
Your hang: 10 cm
Stretching intensity: 24/7
Are you pierced?: No
Height and weight: 188 82

Re: The finger trick for sizing from current ring

Postby Moonfish » November 27th, 2016, 11:59 am

Also the 30/ 36id i can wear when at Home 24\7 but outsider en on Work my Stuff gets to Right and painfull! Maybe i started to big

TrumpJunior
Posts: 409
Joined: July 23rd, 2016, 7:13 pm
Time stretching?: started August 4,2016...6:17 a.m.!
Stretching usage: 30mmID x 15mm WMC,ordering more weight currently,Added a 2nd 32mmID x15mm on top on September 16,Added a 3rd 15mm x 34mmID on November 13 (should be 24/7 very soon with the 3rd ring)...Also discontinued the 30mm ID ring,replaced it with 32mmID,much more comfortable!As of Jan 2017,my ID size is 34mm,I can't even imagine getting a 30mm ID ring on.In June 2017 started using 45mm x 34mmID weight every other day,alternating with 30mm.July 2017,moved to a 34ID x 45mm as my 24/7."The screwball",about 50% of evenings starting July 2017.
Your hang: Your going down Hillary!
Stretching intensity: Been 24/7 since August 4,did not think work would allow 24/7 but it works :)
Are you pierced?: No
Height and weight: 6'2" 200lbs
age: 48
Other sexual practices: Looking at Large Breasted Women in Sears Christmas Catalog
Location: NY

Re: The finger trick for sizing from current ring

Postby TrumpJunior » November 27th, 2016, 2:30 pm

It is very difficult to describe how tight a ball ring should be.I can say that mine are snug and I can only rotate them around if I am well lubricated with shea butter.The rings in your avatar look to have sharper edges than a donut shaped WMC,the softly rounded edges are what you need if you are going to try and wear weight 24/7. If your balls are slipping through,you need to go smaller,it is individual and sized for each guy.Guys here range from 28 to 40mm.If you are easily slipping out often,you might want to go with 32mm,but that is just a guess.

User avatar
Moonfish
Posts: 302
Joined: May 21st, 2016, 7:49 am
Sexuality: Gay
Time stretching?: 18 months
Stretching usage: Donut 30 36
Bullet 50 34
Your hang: 10 cm
Stretching intensity: 24/7
Are you pierced?: No
Height and weight: 188 82

Re: The finger trick for sizing from current ring

Postby Moonfish » November 28th, 2016, 3:53 pm

I see you also have three Different sizes 30/32/34 why is that ? Just to try ?

TrumpJunior
Posts: 409
Joined: July 23rd, 2016, 7:13 pm
Time stretching?: started August 4,2016...6:17 a.m.!
Stretching usage: 30mmID x 15mm WMC,ordering more weight currently,Added a 2nd 32mmID x15mm on top on September 16,Added a 3rd 15mm x 34mmID on November 13 (should be 24/7 very soon with the 3rd ring)...Also discontinued the 30mm ID ring,replaced it with 32mmID,much more comfortable!As of Jan 2017,my ID size is 34mm,I can't even imagine getting a 30mm ID ring on.In June 2017 started using 45mm x 34mmID weight every other day,alternating with 30mm.July 2017,moved to a 34ID x 45mm as my 24/7."The screwball",about 50% of evenings starting July 2017.
Your hang: Your going down Hillary!
Stretching intensity: Been 24/7 since August 4,did not think work would allow 24/7 but it works :)
Are you pierced?: No
Height and weight: 6'2" 200lbs
age: 48
Other sexual practices: Looking at Large Breasted Women in Sears Christmas Catalog
Location: NY

Re: The finger trick for sizing from current ring

Postby TrumpJunior » November 28th, 2016, 11:33 pm

My first ring was 30mm,that is what I came up with after measuring with a water bottle slice.And I also wanted a snug fit because I have a physical workday in construction,and I wanted very much to avoid slippage.That was in August and I had very little hang and very tight balls.I could put the 30mm ID ring on,but it was difficult,with Shea butter it could rotate on my sack pretty well.After 6 weeks I was ready for a second ring,and I decided that a slightly larger one would be fine for on top,so I got a 32 mm ID.T he 32 was much better both as a top ring and also as the one against my balls,so I got another 32mm a few weeks later,then a 34 mm for the top.Even the 34 mm ID ring is good as a lower ring for me.The 30mm ID is just too small for me.Many guys say that their hang decreases in diameter as their balls drop lower,so I may be able to use it in the future.

I have gained about 30mm of hang since August. :)

User avatar
Moonfish
Posts: 302
Joined: May 21st, 2016, 7:49 am
Sexuality: Gay
Time stretching?: 18 months
Stretching usage: Donut 30 36
Bullet 50 34
Your hang: 10 cm
Stretching intensity: 24/7
Are you pierced?: No
Height and weight: 188 82

Re: The finger trick for sizing from current ring

Postby Moonfish » January 26th, 2017, 9:56 am

Thanks you very much for your input!


Return to “Finding the right size weight”

Who is online

Users browsing this forum: No registered users and 2 guests