Sizing Techniques...

Post here for issues to do with sizing and finding the right size weight

Moderators: bobbyballsack, DaveSmith, tundraman

User avatar
ExtraProtein
Posts: 65
Joined: January 28th, 2018, 4:02 am
Time stretching?: Brand New Jan 2018
Stretching usage: 15mm x 38mm
15mm x 36mm
Your hang: TIGHT
Stretching intensity: 12 hours each day so far
Are you pierced?: No
Height and weight: 6’2 (188) 190 (88)
age: 38
Other sexual practices: Edging, Cock Rings
Location: USA

Sizing Techniques...

Postby ExtraProtein » February 24th, 2018, 3:01 pm

I’m pretty new to the Art/Sport of Ballstretching so here’s my 2 cents on sizing...I used Jarod’s methods as discussed in his research but the string method was a bit archaic for me. I used a ringclamp and a woman’s nylon sock. I put the nylon sock over my balls (ringclamps are rigid, lol) and used the clamp for getting a good fit using the index finger method. I was very happy with the results. I measured out 38mm and 36mm. 38mm is my in home wear and 36mm is for leaving my home. The 36mm gives me the mental security of not having slippage.

I purchased 2 ringclamps and took the measurements 4x. You can purchase the ringclamps at Home Depot or Tesco. I’m sure any hardware store has these.

F39BDD72-D29C-4219-B25D-1D0AFFF9FF7B.jpeg
F39BDD72-D29C-4219-B25D-1D0AFFF9FF7B.jpeg (201.57 KiB) Viewed 583 times

User avatar
Protein Pancakes
Posts: 42
Joined: March 16th, 2017, 3:32 pm
Time stretching?: Few months
Stretching usage: 13oz Stainless Steel Scrotum Weight
Ball and cock ring stretcher
Stretching intensity: 24/7/365
18/7/365
Your relationship status: Permanent relationship
Are you pierced?: No
age: 30
Other sexual practices: Ass worship, cuckold, huge cock worship

Re: Sizing Techniques...

Postby Protein Pancakes » February 26th, 2018, 2:26 am

That's low key brilliant

User avatar
ExtraProtein
Posts: 65
Joined: January 28th, 2018, 4:02 am
Time stretching?: Brand New Jan 2018
Stretching usage: 15mm x 38mm
15mm x 36mm
Your hang: TIGHT
Stretching intensity: 12 hours each day so far
Are you pierced?: No
Height and weight: 6’2 (188) 190 (88)
age: 38
Other sexual practices: Edging, Cock Rings
Location: USA

Re: Sizing Techniques...

Postby ExtraProtein » February 26th, 2018, 5:47 pm

Protein Pancakes wrote:That's low key brilliant


Thanks ProP! I was standing in the kitchen with my balls on the counter putting string around them, frustrated with all the different measures and I’m like F—- this, I’m going to Home Depot for some band clamps. Purchased various sizes, knew they would be rigid, dipped into Target, got a pair of women’s panty hose, got home, nuts back on the counter and 38 is def my ID, but 36 is my “public out of doors” ID. Yesterday was my first day at the gym with the 36 on and no slippage problems at all. I wear fitted slim fit trackkies so if there was a slip the weight would NOT go crashing to the floor, lol!!

Band Clamps for measuring ID:
Pros: Accuracy, cost
Cons: Rigid, must wear a very thin protectant on your balls

Band clamps cost $.68
Nylon Panty Hose Cost $2.99

Small price to pay for accuracy, and you want to be precise for WMC Weights!

Cheers!

User avatar
LoadedBalls
Posts: 237
Joined: November 29th, 2015, 9:22 am
Time stretching?: Steel Weights Since Dec 2015
Stretching usage: 30mm ID x 15mm WMC (190g)
30mm ID x 30mm WMC (450g)
2 x 30mm ID x 45mm WMC (690g)
4 x 32mm ID x 15mm USSR's
Custom 30/32mm ID Ball Forcer with 90 to 150mm Rods for a 100 to 160mm Stretch
Custom 4 1/2” Leather Stretcher with 30-32mm ID
Your hang: 175mm (7")
Stretching intensity: Most Evenings: 2 hours with 2 x 45mm 690g WMC's and 2 x USSR's (120mm 1400g Stack)
Some Work Days: 10 hours with 1 x 45mm 690g WMC and 4 x USSR's (105mm 730g Stack)
Your relationship status: Married (officially or otherwise)
Are you pierced?: No
Height and weight: 186cm 77kg (6'1" 170lbs)
age: 37
Other sexual practices: Using my balls as a butt plug
Lifting Heavy Weights with my balls
Scrotal Suspension
Location: UK

Re: Sizing Techniques...

Postby LoadedBalls » February 27th, 2018, 8:58 pm

As a mechanical engineer, I’m fully bought into this technique. Great idea EP. I also didn’t like Jarod’s sizing method. I ended up using a different method. I used insulating tape to bind my balls, not too tight, just one lap round so it didn’t add any noticeable diameter, then measured with a vernier calliper!! Then I rounded up to the next WMC size. For me 30mm has been perfect ever since.
Casually Stretching my balls until I can wear a 150mm stack with ease

User avatar
ExtraProtein
Posts: 65
Joined: January 28th, 2018, 4:02 am
Time stretching?: Brand New Jan 2018
Stretching usage: 15mm x 38mm
15mm x 36mm
Your hang: TIGHT
Stretching intensity: 12 hours each day so far
Are you pierced?: No
Height and weight: 6’2 (188) 190 (88)
age: 38
Other sexual practices: Edging, Cock Rings
Location: USA

Re: Sizing Techniques...

Postby ExtraProtein » February 28th, 2018, 10:19 am

LoadedBalls wrote:As a mechanical engineer, I’m fully bought into this technique. Great idea EP. I also didn’t like Jarod’s sizing method. I ended up using a different method. I used insulating tape to bind my balls, not too tight, just one lap round so it didn’t add any noticeable diameter, then measured with a vernier calliper!! Then I rounded up to the next WMC size. For me 30mm has been perfect ever since.


Thanks LB! The vernier calliper is a solid idea! Yes, once around with insulating tape to hold them in place would actually do the trick. What I liked best about the ringclamp is I could tighten with a flathead screwdriver, place a mark with permanent marker, unscrew than screw it back to my markings once off. It’s truly foolproof. I had to start somewhere and Jarod’s string thing was just not my cup of tea.

On a lighter note, duuude, the hang you’ve developed, brilliant work! You always select a cool pattern when you stack your weights too! Cheers

User avatar
LoadedBalls
Posts: 237
Joined: November 29th, 2015, 9:22 am
Time stretching?: Steel Weights Since Dec 2015
Stretching usage: 30mm ID x 15mm WMC (190g)
30mm ID x 30mm WMC (450g)
2 x 30mm ID x 45mm WMC (690g)
4 x 32mm ID x 15mm USSR's
Custom 30/32mm ID Ball Forcer with 90 to 150mm Rods for a 100 to 160mm Stretch
Custom 4 1/2” Leather Stretcher with 30-32mm ID
Your hang: 175mm (7")
Stretching intensity: Most Evenings: 2 hours with 2 x 45mm 690g WMC's and 2 x USSR's (120mm 1400g Stack)
Some Work Days: 10 hours with 1 x 45mm 690g WMC and 4 x USSR's (105mm 730g Stack)
Your relationship status: Married (officially or otherwise)
Are you pierced?: No
Height and weight: 186cm 77kg (6'1" 170lbs)
age: 37
Other sexual practices: Using my balls as a butt plug
Lifting Heavy Weights with my balls
Scrotal Suspension
Location: UK

Re: Sizing Techniques...

Postby LoadedBalls » February 28th, 2018, 7:06 pm

Thanks EP, I’m still hooked after 2 years of stretching with steel!!

LB
Casually Stretching my balls until I can wear a 150mm stack with ease

User avatar
Savage206
Posts: 194
Joined: September 14th, 2017, 4:35 am
Time stretching?: 5+months
Stretching usage: new personal best fellas!! Got my 45,30 and 20mm all 38ID on at the same time!!! Just over 3 lbs!! #tuglife
Your hang: 4-5 inches?
Stretching intensity: startong to stretch almost 24/7. Can wear my 30mm x 38mm ID WMC all day everyday no problem. Been wearing my 45mmx38ID a few times to work and for 24 hours at a time. My next goal is to be able to wear my 45mmx38ID as my main weight all the time.
Are you pierced?: No
Height and weight: 5'9" 155lbs
age: 34
Other sexual practices: I also dig cock rings..

Re: Sizing Techniques...

Postby Savage206 » March 2nd, 2018, 4:50 am

Dude when he told me that he did this I was like "light bulb!!" That's an exact measurement. If anything this post should be stickies for any new stretchers.. Great idea dude!

User avatar
mehmet.rico
Posts: 328
Joined: July 22nd, 2017, 3:26 pm
Sexuality: Gay
Time stretching?: since June 2017
Stretching intensity: 1 or 2 15mm rings 24/7
Most days 15+15mm
Your relationship status: Permanent relationship
Are you pierced?: No
Height and weight: 188cm, 80kg
Location: Czech Republic

Re: Sizing Techniques...

Postby mehmet.rico » March 2nd, 2018, 12:54 pm

Yes, it probably is an accurate method, but it should also come with a big warning, those clamps are brutal in pinching! ;-D
As mister ExtraProtein said, there seriously needs to be a good barrier between skin and clamps.

Haven't thought of the calliper method, yeah, cool.

Happy hanging weekend lads.

User avatar
ExtraProtein
Posts: 65
Joined: January 28th, 2018, 4:02 am
Time stretching?: Brand New Jan 2018
Stretching usage: 15mm x 38mm
15mm x 36mm
Your hang: TIGHT
Stretching intensity: 12 hours each day so far
Are you pierced?: No
Height and weight: 6’2 (188) 190 (88)
age: 38
Other sexual practices: Edging, Cock Rings
Location: USA

Re: Sizing Techniques...

Postby ExtraProtein » March 3rd, 2018, 1:06 am

mehmet.rico wrote:Yes, it probably is an accurate method, but it should also come with a big warning, those clamps are brutal in pinching! ;-D
As mister ExtraProtein said, there seriously needs to be a good barrier between skin and clamps.

Haven't thought of the calliper method, yeah, cool.

Happy hanging weekend lads.


Yes, absolutely Rico, as I stated, Ring Clamps are rigid, very rigid in fact. One needs to proceed VERY slowly, HOWEVER, this method is foolproof. My reason for looking to alternative methods are simple; everyone here knows WMC weights are the best that money can purchase and you get what you pay for. I spent 109 quid for 1 weight and 1 keychain Allen wrench. At that price, you only want to spend once on that particular size weight. This method helps curb spending waste. I want to use my disposable income for the 45x38 in the upcoming months! :D :D :D

User avatar
ExtraProtein
Posts: 65
Joined: January 28th, 2018, 4:02 am
Time stretching?: Brand New Jan 2018
Stretching usage: 15mm x 38mm
15mm x 36mm
Your hang: TIGHT
Stretching intensity: 12 hours each day so far
Are you pierced?: No
Height and weight: 6’2 (188) 190 (88)
age: 38
Other sexual practices: Edging, Cock Rings
Location: USA

Re: Sizing Techniques...

Postby ExtraProtein » March 3rd, 2018, 1:12 am

Savage206 wrote:Dude when he told me that he did this I was like "light bulb!!" That's an exact measurement. If anything this post should be stickies for any new stretchers.. Great idea dude!


Hahaha, my brainstorming comes from some of your threads Sav! When purchasing WMC weights, you best have your ID narrowed down. Isn’t it true WMC are the most comfortable and best manufactured? It’s my opinion they’re a work of art for your balls, lol. Cheers, and I have more questions, especially about that Spartan parachute leather weight rig you have! :mrgreen:


Return to “Finding the right size weight”

Who is online

Users browsing this forum: No registered users and 2 guests