New from Melbourne

Would all newbies please post here

Moderators: bobbyballsack, DaveSmith, tundraman

User avatar
Cumnutter
Posts: 24
Joined: November 17th, 2017, 6:36 pm
Time stretching?: Started April 2017
Stretching usage: WMC 20mm/34mmID. 30mm/34mm
Your hang: Not yet measured
Stretching intensity: 8hrs/4 days
Your relationship status: Married (officially or otherwise)
Are you pierced?: No
Height and weight: 182cm/115kg
age: 56
Other sexual practices: Urethral Sounding, plugs, cockrings, edging, practising pornosexual
Contact:

New from Melbourne

Postby Cumnutter » November 17th, 2017, 11:18 pm

Hi,
I've just joined this forum as it's dedicated to stretching ballsacks. There seems to be a lot of good info here and a good supportive community of fellow stretchers. I've only recently started with stretching, having purchased a 20mm stainless steel donut. I love the tug on my boys when wearing it, but at 34mm ID, one testicle sometimes pops out. I don't think I need to go smaller to 32, as the 34mm is hard enough to close, so maybe a thin sock could help.
Anyway, a big shout out to the fellow Aussies here, and I look forward to the stretching journey to get some low hangers over time..

Dchen78998
Posts: 29
Joined: November 14th, 2017, 6:06 am
Time stretching?: 4 weeks
Stretching usage: WMC Donut Ball Weight
Your hang: 30mm
Stretching intensity: Few hours
Your relationship status: Married (officially or otherwise)
Are you pierced?: No
Height and weight: 5 feet 6 inch
Other sexual practices: I explore prostate massager for two month

Re: New from Melbourne

Postby Dchen78998 » November 26th, 2017, 8:00 am

Cumnutter wrote:Hi,
I've just joined this forum as it's dedicated to stretching ballsacks. There seems to be a lot of good info here and a good supportive community of fellow stretchers. I've only recently started with stretching, having purchased a 20mm stainless steel donut. I love the tug on my boys when wearing it, but at 34mm ID, one testicle sometimes pops out. I don't think I need to go smaller to 32, as the 34mm is hard enough to close, so maybe a thin sock could help.
Anyway, a big shout out to the fellow Aussies here, and I look forward to the stretching journey to get some low hangers over time..

Hi Cumnutter, I resolve that problem about one week ago when my second stretcher arrive. One of the most important reason it pop is because it is measured in the wrong way which is what I did in the beginning. To calculate your inner diameter correctly you need to find a flexible strap go behind the sack of the testicles, make sure it is tight but not overly tight, the next step is to measure the strap to determine the circumference. Once you have the circumference than divid by 3.14. The next step after that would be multiply by .74 and multiply by .80. .74 represents the tightest inner diameter without restricting blood flow and .80 represents the loosest inner diameter that will not pop on your wearing duration. Hard to wear for me is a matter of practice in skill, I am now one month into stretching so I am more capable closing them than four weeks ago. Since you are just started, I would recommend you to remeasure yourself again and determine the correct inner diameter because popping is not your best friend, however, putting it on and off skill will get easier as you get more used to it. I would also recommend you to go with 79% to 80% calculation for inner diameter for the very first stretcher, once you get used to it than you can progress to tighter fit. For me I have now choose to go with 75% calculation for my inner diameter because I like it tight and I now have enough skill to put on and off properly. The last two advices that I have is to go slow and build gradually and also use shea butter or coconut oil. I am only started few weeks earlier so most of what you encounter I mostly encounter as well but I am happy camper for now. Hope this help.

Str8pumpin
Posts: 209
Joined: September 26th, 2012, 1:52 am
Time stretching?: Since 2012
Stretching usage: 20mm X30mm, 15mm WMC, 30mm WMC, and a 50 mm bullet
Your hang: about 7 1/2 inches, working towards 8
Stretching intensity: Every day, 24/ 7
Your relationship status: Married (officially or otherwise)
Are you pierced?: No
Height and weight: 6 ft 190 lbs
age: 52
Other sexual practices: Solo prostate stimulation, keeping my cock and balls waxed smooth....wishing I could have Tori Black as my sex slave hahaha

Re: New from Melbourne

Postby Str8pumpin » November 26th, 2017, 3:51 pm

Welcome...If you've had a slip through, the ring is too large. Over the years I've gone tighter and tighter with my rings. Part of it is because my hang has become so much longer, but also I've learned on what is tight enough to wear comfortably, yet no slip issues. It sometimes takes trial and error. When I started years ago, I did the measurements and ordered my first ring, which was a 36mm diameter. I now use a modified 28mm diameter (about 29mm or so) for a perfect fit. One thing that always helps, put your ring or rings on in the shower or tub. Warm water helps everything relax and helps in getting the ring on...Just dont drop the bolt...

Old Hilly
Posts: 25
Joined: January 19th, 2017, 6:07 am
Time stretching?: Over 12 months
Stretching usage: A 34mmID X 16mm and a 38x16 high weights stacked together.
Your hang: 100 to 160mm
Stretching intensity: Mainly 24/7
Your relationship status: Married (officially or otherwise)
Are you pierced?: No

Re: New from Melbourne

Postby Old Hilly » November 26th, 2017, 6:56 pm

Cumnutter, with practice fitting the rings will become easier. If you had a "slip" with the 34mm ring then 32mm is probably what you need at the moment.
I found that as time progresses and as skin stretches the rings need to get slightly smaller but all is not lost, you can always wear the larger ring above the smaller ring for added stretch but this will take time, be patient and enjoy the stretching.

User avatar
Cumnutter
Posts: 24
Joined: November 17th, 2017, 6:36 pm
Time stretching?: Started April 2017
Stretching usage: WMC 20mm/34mmID. 30mm/34mm
Your hang: Not yet measured
Stretching intensity: 8hrs/4 days
Your relationship status: Married (officially or otherwise)
Are you pierced?: No
Height and weight: 182cm/115kg
age: 56
Other sexual practices: Urethral Sounding, plugs, cockrings, edging, practising pornosexual
Contact:

Re: New from Melbourne

Postby Cumnutter » December 10th, 2017, 4:27 am

I think I’ve resolved the slip out issue with a higher donut ring. I was having problems with a circular profile donut ring of 20mm thickness and 34mm ID. But now I’m wearing a 30mm high donut and have not had one incidence of slip since. I think the slipout was occurring because there was too much ‘slack’ in between balls and penis.
All good for now :)
Happy stretching!

User avatar
tundraman
Posts: 1376
Joined: April 25th, 2012, 11:11 am
Sexuality: Bisexual
Time stretching?: 3 + years
Stretching usage: WMCs
Your hang: free 6.5 inch
Stretching intensity: 24/7/365 until I reached my goal.
Now I only stretch when I feel like it.
Height and weight: 70 inch, 155 pounds
Location: Albuquerque, New Mexico, USA

Re: New from Melbourne

Postby tundraman » December 10th, 2017, 10:56 am

The taller rings tend to tip less toward the higher teste. That makes it much harder for it to dive in.
Gett'er Down, Chuck
Index of info posts - viewtopic.php?f=4&t=931
Jarod's guide: http://www.secretleather.com/jarod.johansen
Dave's Secretleather site for real WMC's: http://www.secretleather.com/

Old Hilly
Posts: 25
Joined: January 19th, 2017, 6:07 am
Time stretching?: Over 12 months
Stretching usage: A 34mmID X 16mm and a 38x16 high weights stacked together.
Your hang: 100 to 160mm
Stretching intensity: Mainly 24/7
Your relationship status: Married (officially or otherwise)
Are you pierced?: No

Re: New from Melbourne

Postby Old Hilly » December 12th, 2017, 6:34 am

As an experiment I tried wearing my 37/38mm ring (which normally falls off at the most awkward moment) below my 34mm ring (which is slightly uncomfortable when worn down low) and interestingly enough there has been no slippage. I have no idea why this would happen but it has and as a side benefit, things are more comfortable with the large ring down low. I don't know why it works but I'm not complaining!


Return to “Newbies”

Who is online

Users browsing this forum: No registered users and 5 guests