Measuring for the first WMC

Would all newbies please post here

Moderators: bobbyballsack, DaveSmith, tundraman

User avatar
weightonpa1
Posts: 395
Joined: December 28th, 2012, 1:21 am
Sexuality: Bisexual
Time stretching?: 5yrs
Stretching usage: WMC
Stretching intensity: 24/7/365. other than when i see GP or Hospital visit.
Your relationship status: Married (officially or otherwise)
Are you pierced?: Yes
Height and weight: 5'10"
age: 41
Location: East Yorkshire

Re: Measuring for the first WMC

Postby weightonpa1 » May 5th, 2014, 9:55 pm

unnclesam wrote:@ weightonpa1 & tundraman

Thanks for your replies !
After having done another round of measurements, I've decided to go for a Twin Pack of 15mm WMC ® Ball Weights with an ID of 34mm.
I've been trying to figure out the shipping cost outside the UK, to The Netherlands to be more presice, yet I didn't find anything on Dave's website other then an approx. 10 day dilverytime for international orders.
Any info on shipping cost, is highly appreciated !

Cheers :mrgreen:


After looking around i placed order in basket then clicked on checkout and in postage area clicked on Netherlands and it came up with £12.00 airmail i then cancelled the order. hope this help.

User avatar
unnclesam
Posts: 130
Joined: April 21st, 2014, 2:58 pm
Time stretching?: 1,5 yr
Stretching usage: *Update 16.06.2014*
My 15mm x 34mm (1.34") ID WMC ® Twin Pack arrived, wearing them with great pride and joy

*Update 29.08.2014*
My 30mm x34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.10.2014*
My 45mm x 34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.01.2015*
My 30mm x 32mm (1.26") ID WMC ® Ball Weight arrived
Your hang: 145mm [6"]
Stretching intensity: *Update 16.06.2014*
Started my Ball Stretching journey according to Jarod Johansen's "A Graded Method of Progress: Beginner to Advanced"

*Update 01.12.2014*
As often as possible, after achieving a hang that no longer allows me to wear my WMC ® Ball Weights without showing a huge bulge in my pants during the day at work.
Are you pierced?: No
Height and weight: H= 1,85 m or 6.06 Ft | W= 100kg or 220 pounds
age: 50
Contact:

Re: Measuring for the first WMC

Postby unnclesam » May 6th, 2014, 5:06 pm

@ weightonpa1
Dave informed me to follow the same procedure .... but thanks for your support anyways, it's highly appreciated !

User avatar
weightonpa1
Posts: 395
Joined: December 28th, 2012, 1:21 am
Sexuality: Bisexual
Time stretching?: 5yrs
Stretching usage: WMC
Stretching intensity: 24/7/365. other than when i see GP or Hospital visit.
Your relationship status: Married (officially or otherwise)
Are you pierced?: Yes
Height and weight: 5'10"
age: 41
Location: East Yorkshire

Re: Measuring for the first WMC

Postby weightonpa1 » May 7th, 2014, 9:58 pm

Your welcome. :D

User avatar
unnclesam
Posts: 130
Joined: April 21st, 2014, 2:58 pm
Time stretching?: 1,5 yr
Stretching usage: *Update 16.06.2014*
My 15mm x 34mm (1.34") ID WMC ® Twin Pack arrived, wearing them with great pride and joy

*Update 29.08.2014*
My 30mm x34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.10.2014*
My 45mm x 34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.01.2015*
My 30mm x 32mm (1.26") ID WMC ® Ball Weight arrived
Your hang: 145mm [6"]
Stretching intensity: *Update 16.06.2014*
Started my Ball Stretching journey according to Jarod Johansen's "A Graded Method of Progress: Beginner to Advanced"

*Update 01.12.2014*
As often as possible, after achieving a hang that no longer allows me to wear my WMC ® Ball Weights without showing a huge bulge in my pants during the day at work.
Are you pierced?: No
Height and weight: H= 1,85 m or 6.06 Ft | W= 100kg or 220 pounds
age: 50
Contact:

Re: Measuring for the first WMC

Postby unnclesam » June 14th, 2014, 7:25 pm


User avatar
Chris
Posts: 3
Joined: May 10th, 2014, 2:22 pm
Sexuality: Gay
Time stretching?: since 01/05/14
Stretching usage: 2x 15mm x 36mm (1.42") ID WMC ® Ball Weight 24/7
Your hang: 4.5 inches
Stretching intensity: 24/7/365
Are you pierced?: No
Height and weight: 5' 11'' 12 stone
age: 34
Location: London

Re: Measuring for the first WMC

Postby Chris » June 15th, 2014, 12:13 pm

Hi All

have been stretching for a couple of months, usually using 2 15mm WMC's 36 ID 24/7.

Have any of you found that as you start to see results and develop a bit of a hang your size changes, was definitely 36 ID when I started but these seem to slip off a lot more frequently than before with the smaller testicle popping through. not sure if i should just chalk this up to experience or go down a size to 34 or even 32 ID.

any tips welcome

Chris

User avatar
tundraman
Posts: 1405
Joined: April 25th, 2012, 11:11 am
Sexuality: Bisexual
Time stretching?: 3 + years
Stretching usage: WMCs
Your hang: free 6.5 inch
Stretching intensity: 24/7/365 until I reached my goal.
Now I only stretch when I feel like it.
Height and weight: 70 inch, 155 pounds
Location: Albuquerque, New Mexico, USA

Re: Measuring for the first WMC

Postby tundraman » June 15th, 2014, 1:00 pm

When you start from nearly no hang at all the needed ID does decrease. I really don't think this can be avoided as the smaller ID would be too tight to started out with all your tissues bunched up at the start.
If slippage is near happening (or happening) it's time to down size. Here, with only one testicule and a small (maybe 1 inch) hang, I started at 36mm and am now nominally around 32mm. I ordered smaller rings as soon as I got close to slippage and used thin socks and/or ponytailers etc. between sack and ring to prevent slippage while I awaited the new rings.
The larger rings are still good for above the critical bottom ring so there is no waste.
Index of info posts - viewtopic.php?f=4&t=931
Jarod's guide (New link): https://www.secretleather.com/jarod-joh ... hing-guide
Secretleather site for real WMC's: https://www.secretleather.com

User avatar
unnclesam
Posts: 130
Joined: April 21st, 2014, 2:58 pm
Time stretching?: 1,5 yr
Stretching usage: *Update 16.06.2014*
My 15mm x 34mm (1.34") ID WMC ® Twin Pack arrived, wearing them with great pride and joy

*Update 29.08.2014*
My 30mm x34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.10.2014*
My 45mm x 34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.01.2015*
My 30mm x 32mm (1.26") ID WMC ® Ball Weight arrived
Your hang: 145mm [6"]
Stretching intensity: *Update 16.06.2014*
Started my Ball Stretching journey according to Jarod Johansen's "A Graded Method of Progress: Beginner to Advanced"

*Update 01.12.2014*
As often as possible, after achieving a hang that no longer allows me to wear my WMC ® Ball Weights without showing a huge bulge in my pants during the day at work.
Are you pierced?: No
Height and weight: H= 1,85 m or 6.06 Ft | W= 100kg or 220 pounds
age: 50
Contact:

Re: Measuring for the first WMC

Postby unnclesam » August 25th, 2014, 4:32 pm

I'm about to order my next WMC Ballweight today, latest tomorrow :mrgreen: In accordance to Jarod's guide I will step up to a 30mm Ballweight.
However I'm wondering if due to the winter period that's heading my way, I should buy a 30x36 instead of a 30x34. I currently wear two 15mm x 34mm ballweights and they fit pretty snug, although there's no discomfort whatsoever, thus I'm tempted to buy a 30x36. On the other hand however I've experienced a few slip-offs when wearing a single 15x34 weight, but never when when wearing both at the same time.
So I'm not sure what to buy .....

Looking forward to your responses !
Cheers

User avatar
tundraman
Posts: 1405
Joined: April 25th, 2012, 11:11 am
Sexuality: Bisexual
Time stretching?: 3 + years
Stretching usage: WMCs
Your hang: free 6.5 inch
Stretching intensity: 24/7/365 until I reached my goal.
Now I only stretch when I feel like it.
Height and weight: 70 inch, 155 pounds
Location: Albuquerque, New Mexico, USA

Re: Measuring for the first WMC

Postby tundraman » August 25th, 2014, 10:43 pm

unnclesam, Looking at your picture with the 15x34s, you don't look too tight at all - especially with a slip having happened with a single 34.
I think the 34x30mm is your best bet.
Index of info posts - viewtopic.php?f=4&t=931
Jarod's guide (New link): https://www.secretleather.com/jarod-joh ... hing-guide
Secretleather site for real WMC's: https://www.secretleather.com

User avatar
unnclesam
Posts: 130
Joined: April 21st, 2014, 2:58 pm
Time stretching?: 1,5 yr
Stretching usage: *Update 16.06.2014*
My 15mm x 34mm (1.34") ID WMC ® Twin Pack arrived, wearing them with great pride and joy

*Update 29.08.2014*
My 30mm x34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.10.2014*
My 45mm x 34mm (1.34") ID WMC ® Ball Weight arrived

*Update 27.01.2015*
My 30mm x 32mm (1.26") ID WMC ® Ball Weight arrived
Your hang: 145mm [6"]
Stretching intensity: *Update 16.06.2014*
Started my Ball Stretching journey according to Jarod Johansen's "A Graded Method of Progress: Beginner to Advanced"

*Update 01.12.2014*
As often as possible, after achieving a hang that no longer allows me to wear my WMC ® Ball Weights without showing a huge bulge in my pants during the day at work.
Are you pierced?: No
Height and weight: H= 1,85 m or 6.06 Ft | W= 100kg or 220 pounds
age: 50
Contact:

Re: Measuring for the first WMC

Postby unnclesam » August 26th, 2014, 6:42 am

@ tundraman

Thanks for your advise!

Going to place my 30x34 order tonight after I return from work.
Cheers

Topgun322
Posts: 6
Joined: March 17th, 2016, 8:32 pm
Time stretching?: 1 month
Stretching usage: Manual
Your hang: 2 inches
Stretching intensity: Daily
Are you pierced?: No
Height and weight: 6 foot 19

Re: Measuring for the first WMC

Postby Topgun322 » March 22nd, 2016, 9:48 pm

If I figure out how to post pics can anyone look at tell me what size you think I need. Struggling with measurement and hate to get wrong size


Return to “Newbies”

Who is online

Users browsing this forum: No registered users and 1 guest