I've been reading several postings on "Measuring" including Jarod Johansen's Full and Comprehensive Ball Stretching Guide
with great pleasure. It's a fantastic resource for Ball Stretching Information, just like this forum !
However having "measured" myself, as described in Jarod's guide and having done the math, I've came up with an average ID of 32 mm using the 0.7 and 0.8 multiplier and averaged the results.
When looking at the individual results, the 0.7 multiplier comes up with an ID of 29.5 mm, were the 0.8 multiplier gives me an ID of 33.7 mm.
I've also been reading up on other new- and experieced user posts, and it seems that (unless I'm wrong ...
) as one makes progress in stretching, the ID can be chosen somewhat smaller which in my line of thinking would make sense.
Having said that, I'm looking for advise for my first set of 15mm WMC ® Ball Weights what ID best to buy. Would it be recommend to buy the 34 or 32mm ID given the above mentioned ?
Many thanks in advance for all your responses !
Ball Stretcher Newbie Sam